click to enlarge

The Model PD765 Trident Meter is an all new Universal Panel Meter that handles all the common process display applications with simplicity, reliability, accuracy and ease. It is factory calibrated to accept process voltage and current inputs, 100 ohm platinum RTDs and the four most common thermocouples. Setup and programming is a jumper-free, single switch, snap using the simple four-button programming method or a computer. And if there are multiple meters to be programmed, the Trident's Copy capability allows one meter's setup to be automatically copied to another meter.

• Current, Voltage, Thermocouple, & RTD Inputs
• Shallow Depth Case 3.6" Behind Panel
• NEMA 4X, IP65 Front
• Universal Power Supply 85-265 VAC or 90-265 VDC
• Two Relay Options
• 4-20 mA Analog Output Option
• 24 VDC @ 200 mA Transmitter Power Option
• RS-232, RS-422/485 Serial Communication Options
• Process & Temperature
• High & Low Alarms
• Latching or Non-Latching Relays
• Pump Alternation Control
• Time Delay & Fail-Safe Relays
• Maximum & Minimum Readings
• Data Acquisition with MeterView® Software
• Meter Copy Feature
• Easy Four-Button Programming and Setup with Lockout Capability
• Display: 4 Digits (-1999 to 9999), 0.56" High
• Linear or Square Root Function with Low-Flow Cutoff

click to enlarge

The F012 display is a basic flow rate and totalizing display. The total and flow rate are displayed together with large 0.67” (17mm) digits and smaller 0.31” (8mm) digits along with the units of measurement. Pressing the clear button twice will clear the running total. Accumulated total is shown after pressing the select key. The F012 has optional inputs including Pulse, Coil, NAMUR, 4-20 mA or 0-10 V. The F012 is offered with a plastic, aluminum, or explosion proof enclosure, or it can be ordered to simply panel mount. The options for powering the unit are battery, IS battery, loop power, 80-240 VAC with sensor supply, IS 16-30 VDC, and 8-24 VAC/VDC. The F012-XI can be used in hazardous areas too, classification EEx ia IIB T4.

• Simple but flexible display shows both flow rate and total
• -40 to 80°C operational temperature
• 7 Digit LCD display offered with backlight
• 11 Digit Accumulated total with engineering units
• Available with numerous enclosure options and minimal depth requirement
• Clear menu structure that is universal across line
• Contains 7 Digit K-Factor for tuning
• All settings are stored in EEPROM for power failure protection
• Differing measuring units may be chosen for flow and total
  

click to enlarge

The ConsoliDator® is an easy to use multi-channel controller that accepts 4-20 mA, flow meter pulse, and digital inputs and displays them on an easy to read LCD screen. It is equipped with multiple relays that have user-definable actions, 4-20 mA outputs, and Modbus protocol serial communication capabilities.

• Eight 4-20 mA inputs
• 32-Point Linearization
• Free Programming & Data Logging Software
• Sum & Difference Functions
• Square Root Function
• Totalization for 4-20 mA Inputs
• Four Pulse Inputs
• Four Digital Inputs
• Two 4-20 mA Outputs
• Nine Form C 10 A Relays
• RS-232 Modbus® RTU
  
  

click to enlarge

The PD213 pressure gauge can handle pressure ranging from vacuum to 20,000 psi. The pressure is displayed on a large 0.6" (15.2mm) 5 digit LCD. This device has a full scale accuracy of 0.25%.

• Digital gauge, pressure switch, & transmitter
• Vacuum, compound pressure, 15 to 20,000 psi
• 0.25% FS Terminal Point Accuracy (0.13% BFSL)
• 5 digit LCD, % bargraph & battery level indication
• Large 0.6" (15.2 mm)
• 4-20 mA output & 2 Form C relays
• Stainless steel case
• NEMA 4, IP65 case
• Battery, loop, or 12-36 VDC powered
• Password protected menus
• Easy-to-use menu
• Five backlight settings
• Twelve engineering units
• Menu configure feature
• Update rate
• Dampen mode
• Auto off
  

click to enlarge

The PD549 is a ¼ DIN Nova Digital Temperature Controller with auto-tuning control for both heating and cooling. One of four user programmable set points may be selected for PID control in the form of time proportional relay on/off output, time proportional voltage pulse, or 4-20 mA signal control. Its universal input accepts 23 input varieties, including thermocouple, RTD, and voltage inputs and can be easily configured for a 4-20 mA input. The relays may be programmed as alarms with 20 different high, low, and deviation alarm types that can include failsafe operation. Digital input options add the ability of external contacts to operate the controller. RS-485 serial communication options include protocols for Master/Slave set point control, Modbus ASCII and RTU, as well as PC softwar.

• Universal Input for Thermocouple, RTD, and Voltage Inputs
• Heating and Cooling Output Controls
• Auto-Tuning PID Parameter Setup with Fuzzy Logic
• 4 Programmable Set Points
• Programmable 4 Zone Temperature Bias
• Up to Three Relay Outputs for PID Control or Alarms
• Time Proportional PID Relay Control
• High, Low, and Deviation Alarms
• Time Delay & Fail-Safe Relays
• Two Analog Outputs for 4-20 mA or Voltage Pulse Control
• Auto/Manual Output Control
• RS-485 Communication Option
• Two Digital Input Option
• 3 Year Warranty
• Easy Four-Button programming with Lockout Capability
• Dual Four-Digit LED Display
• PV Display: 4 Digits, 20.5 mm (0.81 in)
• SP Display: 4 Digits, 11.0 mm (0.43 in)
• Power Supply 100-240 VAC, 50/60 Hz