|
|
 |
| Industrial
Fiber Optics |
|
click
to enlarge
|
Weed
Instrument is the world’s leading manufacturer
of Fiber Optic Networking Equipment for Industrial
Automation & Process Control applications.
- Over
three decades of experience in fiber optic networking
technology.
- Weed
Instrument offers the world’s largest selection
of fiber optic converters for PLC’s and
Distributed Control Systems.
- Weed
provides Fault Tolerant, Multidrop, and Fiber
Optic Communications solutions.
|
 |
| Options: |
- Industrial Ethernet, Profibus,
Modbus, Modbus Plus, ControlNet, DeviceNet,
Data Highway Plus, DH-485, Genius, Remote I/O,
RS232/484, Reliance R-Net
- Analog: 4-20mA, 0-10V
|
|
|
|
|
|
| Electrical
Interface Modules (EIMs) |
|
|
Electrical
Interface Modules (EIMs) connect the EOTec 2000
modem nodes to the "copper based" PLC
devices and fieldbus networked equipment.
A
maximum combination of five electrical or optical
interface modules may be connected together in
one modem node. Inter-module communications and
operating power is achieved through the integrated
module backplane "BUS" connections of
the EOTEC 2000 architecture.
|
|
|
|
|
|
| Fiber
Optic Interface Modules (OIMs) |
|
|
Optical
Interface Modules (OIMs) connect the EOTec 2000
modem nodes to the fiber optic cable network,
and transfer network data between nodes. Cascade
different optical modules in a single modem assembly
and optically link modems utilizing 850/1300nm
optical wavelengths, Multi-mode or Single mode
fiber, and SMA or ST* connectors.
A
maximum combination of five optical or electrical
modules may be connected together in one modem.
Inter-module communications and operating power
is achieved through the integrated module backplane
"BUS" connections of the EOTEC2000 architecture.
|
|
|
|
|
|
| Self-Healing
Ring Modules |
|
|
The
Patented 2C3x series Self-Healing Ring Modules
provides fiber media redundancy when utilized
in each node or drop of a EOTec 2000 system fiber
optic ring-network. Three versions of the module
are available:
The
Model 2C31 and 2C32 are designed specifically
for use in ControlNet® applications in conjunction
with the Model 2C20 Electrical Interface Module
(2C31 for Single Channel and 2C32 for Dual Channel
(redundant) communication networks.
The Model 2C30 supports non-ControlNet® applications
in conjunction with any Electrical Interface Module
other than the 2C20.
|
|
|
|
|
|
| Power
Supply Modules |
|
|
Several
power supplies are offered in EOTec 2000 System
to conform to available power sources.
Mix
and match Power Supply Modules in a node to provide
the option of "Hot-Swappable" dual power
supplies with diagnostic outputs, eliminating
"Single Point of Failure" locations
in the network.
Output
power is distributed to other modules in a node
via the internal EOTec 2000 BUS.
|
|
|
|
|
|
)