CTH Controls Inc.
 
1.888.550.6829   Supplier Inquiry   About Us      
 
 
 
 
 
Eurotherm Power Control
Eurotherm Power Control
Eurotherm Action Instrument
Eurotherm Chessel
Hardy Process Weight
Hardy Process Weight
London Electronics Ltd.
Paragon Robotics
Ohio Semitronics
Dimetix Inc.
TandD Data Loggers
Ametek Dixson
Intempco
Noshok
Precision Digital
Process Sensors Corp
Ultra Electronics
Available Services
Calibration
Calibration
none
Repair
Repair
none
Programming
Programming
none
Integration
Integration
none
Start Up
Start-Up Service
none
Weight Systems
Weight Systems
none
Validation
Validation
none
CLICK HERE FOR FULL LIST OF MODELS WITH DESCRIPTIONS
Weight Instruments – Weight Processors

Hardy Weight Instruments – Weight ControllersWeight processors are used as a front-end to a control system for all types of general weighing applications. They measure, condition and communicate weight without any need to control. Hardy weight processors are part of a process manufacturer's industrial weighing systems & equipment.

HI 6600 Series Modular Sensor System

Hardy HI 6600 Series Modular Sensor System

Up to 30 Channels of Weight on one Ethernet Connection!

The new HI 6600 series is a modular system of weight processors that deliver up to 30 channels of fast, stable, high-resolution weight readings to PLCs, PACs and DSCs over a single fieldbus network connection.

Ideal for applications that require more than one channel of weight, such as inventory tank farms, batching systems and multi-head filling machinery; each channel of the HI 6600 processes signals from up to four connected load cells then outputs the entire system’s weight data over EtherNet/IP, Ethernet TCP/IP, Modbus RTU, Modbus TCP or Profibus-DP.

SOLID PERFORMANCE

The HI 6600 enhances productivity of manufacturing systems by digitally suppressing noise and dramatically reducing scale settling time. Even in noisy environments with excessive amounts of mechanical vibration, the HI 6600 provides a steady 1:10:000 resolution in oz, lb, ton, g, and kg with 110 updates per second over its variety of communications protocols.

EASY INSTALLATION

Just snap the number of weight channels you need onto a DIN rail, cable the units together to the Gateway Module using standard Cat5e cable, connect sensors, power up and press DISCOVER- the system will automatically identify all the modules connected together and make them addressable for set-up and calibration through the PLC, embedded Webserver or optional display. A Rockwell EDS_AOP simplifies integration using RSLogix.

SIMPLE SET-UP & CALIBRATION

The embedded webserver enables access to setup and calibration from anywhere on your network. An optional display adds front panel keys, simple menus and help text to make local control elementary. Use Hardy's exclusive C2® for automatic system calibration to save hours in commissioning and routine maintenance.

QUICK MAINTENCE & DIAGNOSTICS

With INTEGRATED TECHNICIAN®, maintain and troubleshoot the weighing system from anywhere in the world or use Hardy’s intuitive local display that supports multiple languages. Store all the system parameters on a USB, clone settings between channels, and restore settings with the press of a button. Quick-disconnects on all wiring makes hot swapping damaged channels a snap!

OPTIONAL DISPLAY

Hardy’s big, bright display allows local set-up, calibration and troubleshooting of the weight system without the need to access parameters via a PC, PAC, or PLC. Basic monitoring and maintenance can be done by anyone through its IP66 rated keypad. The display can show weight from up to 30 connected weight modules, displaying up to 4 channels simultaneously. Name weight channels for easy Identification and arrange them to show in any order.

ULTRA LOW POWER CONSUMPTION

At just 1.72 watts of power per channel and 3.9 watts per Gateway Module, eliminate the cost of cooling in the control cabinet and create high-density cabinet designs to save space and money.

VIBRATION IMMUNITY

Hardy’s WAVERSAVER® supresses vibration and mechanical noise, dramatically reducing scale settling time and increasing the speed of stable weight readings.

 

  Click here to view data sheet Click here for more information
HI 6500 Series

Hardy HI 6500 Series

EtherNet/IP® & Profibus-DP® Weight Processor With A Big, Bright Multichannel Display

The HI 6500 series are EtherNet/IP® enabled weight processors with a Rockwell Add-On-Profile (AOP). They have a big, bright multi-channel display and deliver fast, high-resolution weight readings. They also feature Profibus-DP, Modbus, Analog, and Ethernet communication options.

Weight processors are used as front ends to control systems or standalone for all types of general weighing applications. Operating blind or with a display, they measure, condition and communicate weight without any need to control.

SOLID PERFORMANCE

The HI 6500 series delivers stable processed weight with a resoluton of 1:10:000, and an update speed of 110 updates per second (processor, display and comm.). They enhance the productivity of process manufacturing systems where fast, precise weight-based controls are critical. They offer you many communication choices including EtherNet/IP, Modbus TCP & Modbus RTU, and Analog 4-20mA.

INSTALLATION YOUR WAY

For panel mounting, simply drill five holes to mount the keypad/ display on the front and the instrument to the other side. For blind or remote mounting, just snap its built-in clip onto a DIN rail or mount on a wall. The HI 6500 series fits in a 2" deep cabinet!

EASY TO READ

For maximum visibility and usability, the HI 6500 series features a big, rugged high-contrast display with a 140 degree viewing angle for easy reading at a distance. Discrete status messaging means there is no need to check a manual for error codes or instructions.

MULTI-CHANNEL DISPLAY

To save space and energy, the HI 6500 series can deliver the weight readings of up to four instruments on one big, bright display panel simultaneously! Name your display inputs for easy ID and rearrange them in any order.

LOW POWER CONSUMPTION

Each instrument consumes just 5 watts nominal and 7 watts max, saving energy costs while driving up to 8 load points and two Hardy IT Junction Boxes. Share a keypad/display with four instruments and save 1.5 watts more per blind unit.

EASE OF SET-UP & CALIBRATION

A set-up wizard guides you through installation and calibration, or use the embedded web server to set up parameters from anywhere on your network. Front panel keys and simple menus enable quick, easy setup with supporting help text. Use Hardy's exclusive C2® for automatic system calibration, which saves hours of start-up and maintenance time. A Rockwell Add-On-Profile makes PLC setup fast and easy. Hardy has also developed a Profibus-DP .GSD file available on the downloads tab on the Hardy HI 6500 page.

INTEGRATED TECHNICIAN®

Quickly and easily troubleshoot the weighing system from the front panel of the display or connected control system using Hardy's proprietary INTEGRATED TECHNICIAN (IT) built-in system diagnostics.

VIBRATION IMMUNITY

Hardy’s WAVERSAVER® technology supresses vibration and mechanical noise, dramatically reducing scale settling time and increasing the speed of stable gross and net weight readings.

  Click here to view data sheet Click here for more information
HI 6300 Series

Hardy HI 3010 Filler/Dispenser Controller

HI 6310 Multi-Channel Display Saves Time, Space, Money

Have you ever stood across the plant floor straining to see your system's weight on your controller's display? Not anymore! The HI 6300 series of weight processors solves that problem with the easiest to read display in the industry! And they have a whole lot more.

For maximum visibility and usability, the HI 6300 series features a rugged high contrast display with a 140 degree viewing angle for easy reading.This high-definition display allows for easy to read messaging with no need to check a manual for error codes or instructions.

The HI 6310 model features a multi-channel display that can show the weight readings of up to four instruments on one panel simultaneously! Just one display can serve as an easy-to-use scale interface for all four connected instruments. Save money, space and time!

The HI 6300 Series includes the HI 6300 and the HI 6310. Both instruments are engineered to provide accurate, stable and repeatable weight, while striking the optimum balance between price and application flexibility.

The HI 6300 series can be used as a standalone weight processor or as the front-end to a weight-based control system. These instruments read, condition, and digitize load cell and strain gauge signals commonly found in process weighing applications, including inventory management, batching, blending, filling, dispensing, and check weighing. With a robust, ultra-low profile design and powerful weight processing features, they are an ideal solution for applications where fast, precise weight-based controls are critical functions of a process.

Easy Setup!

A built-in set-up wizard guides you through installation and calibration or use the embedded web server in the HI 6300 series to set up all the parameters from anywhere on your network. Front panel keys and LCD display with simple menus enable quick,simple setup of parameters with help text displayed every step of the way. Designed for use worldwide, the HI 6300 series supports messaging in a variety of languages.

Use the Hardy Process Toolbox's exclusive C2® or eCAL™ for automatic calibration of the weighing system, saving hours of start-up time.

Featuring Hardy’s famous WAVERSAVER® technology, the HI 6300 series ignores the effects of vibration and mechanical noise typically found in machine and factory environments. WAVERSAVER® dramatically reduces scale settling time while remarkably increasing the instrument’s output speed of stable Gross and Net weight readings.

Quickly and easily troubleshoot and isolate problems in your weighing system from the front panel of the display or connected control system using the Hardy proprietary INTEGRATED TECHNICIAN built-in system diagnostics.

Installation Your Way

For panel mounting, simply drill five holes using the included template to mount the keypad/ display to the front and the instrument electronics to the other side of the panel. No more rectangular holes to cut! You can also remote mount the front panel up to 100 feet away. Just snap it onto a DIN rail or mount on a wall. Blind remote or 3wall mount configuration is also a snap. The Ultra Low Profile Design allows the HI 6300 series to fit in a 2" deep cabinet!

Hardy’s process weighing solutions are easy-to-install, configure, commission and operate. They are easy-to-maintain and save you time, money, raw materials and your finished product. Contact us today to find out how Hardy can help you integrate weighing into your application!

  Click here to view data sheet Click here for more information
Panel Mount Wall System

Hardy Panel Mount Wall System

Panel Mount Wall System for HI 6500 and HI 6300

Need a NEMA 4X enclosure to protect your instrumentation?  Imagine assembling all the parts, drilling one-inch holes in stainless steel, installing the instrument and a summing card, inserting the glands, making it all waterproof---all before you can even start connecting your load cells!

Now imagine how much time and effort you will save by taking a Hardy Panel Mount Wall System (PMWS) out of the box and hanging it on the wall.

Now imagine how much time and effort you will save by taking a Hardy Panel Mount Wall System A fully assembled Hardy PMWS, saves you the time and expense of developing a custom IP66 rated enclosure for an HI 6300 or HI 6500 instrument. With a built in summing card, the PMWS eliminates the need for a system junction box.

Just hang it on the wall, connect your load cells to the built-in summing card and you are ready to calibrate.  The PMWS is ideal for general process weighing applications, such as those found in stock, make, pack and ship manufacturing operations.

So Easy!

  • Easy to install; saves 5-6 hours over designing and assembling it yourself
  • No designing required
  • No holes to drill
  • No extra parts to order
  • Most popular configurations offered
  • 6300 instrument series
  • 6500 instrument series
  • INTEGRATED TECHNICIAN® (IT) built in
  • Hardy Summing Card included
  • Robust NEMA 4X enclosure with UL rating (pending)
  • Latching Door
  • Extra room for cabling
  Click here to view data sheet Click here for more information
Swivel Mount Enclosures for Weight Processors

Hardy HI 3010 Filler/Dispenser Controller

New Swivel Mount Enclosure

Turns an HI 6500 or HI 6300 Series Weight Processor Into a Digital Weight Indicator

Hardy is now shipping a new Digital Weight Indicator in a Swivel Mount Enclosure designed for harsh and heavy wash down environments.  The robust design is made to withstand the most demanding industrial installations. Made in the USA using 16 gauge 304 Stainless Steel, the enclosure is rated for IP66/NEMA 4X environmental conditions and is delivered containing either the Hardy HI 6500 or HI 6300 series weight processor.

The large, high-contrast LCD display that makes the Digital Weight Indicator easy to view and simple to use is protected from impact by a thick polycarbonate window behind a water-tight membrane.   The tactile button cluster eliminates accidental triggering caused by wipe-down sanitizing and harsh water-jet cleaning.

Easy Installation

Featuring an extra-large base, Hardy’s Swivel Mount Enclosure can be permanently mounted on both vertical and horizontal surfaces or simply left free-standing on a table top.  The swivel mount base ships with just 4 mounting holes that match Hardy’s bench and floor pedestals, leaving plenty of solid surface area to drill a custom hole-pattern that suits your specific installation requirements.

Simple Set-Up and Calibration

Both HI 6500 and HI 6300 versions come with Hardy’s new Set-Up WIZARD that will guide users step-by-step through instrument set-up and calibration.  Use Hardy’s C2 enabled sensors for automatic system calibration and scale verification, saving hours in commissioning and routine maintenance.   The high-definition LCD display with a 140 degree viewing angle makes instrument use easier than ever with Help Text available at the press of a button.  Use the Hardy’s embedded Webserver to remotely monitor, diagnose, or control your instrument from anywhere on your network.

  Click here to view data sheet Click here for more information
 
 
CTH Controls Inc.   CTH Controls Inc.
5100 South Service Road, Unit 2
Burlington, ON. L7L 6A5 Canada
Phone: 905-792-6829
Toll Free: 1-888-550-6829
Fax: 905-792-6902
sales@cthcontrols.com
  arrow Products arrow Contact Us  

For Secure Payments
Mastercard Visa
<empty> <empty> <empty>
<empty>
PAYPAL
PAYMENT
GUIDE
<empty>
<empty> <empty> <empty>
  arrow Services arrow Supplier Inquiry  
  arrow Support arrow ISO Certification  
  arrow About Us arrow Return Policy  
    arrow Careers  
  arrow Line Card  
© Copyright 1998-2024, CTH Controls Inc. All rights reserved