Hardy HI HLPT Tension Load Cell

The Hardy HI HLPT ADVANTAGE® Series, tension load cells are designed for use on low to medium capacity vessels. Each tension load cell consists of mounting hardware and a stainless steel mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, onboard electronic certs, a ¼ NPT conduit adapter and twenty feet of cable.

Each tension load cell assembly is specifically designed to eliminate the effects of unwanted forces to provide exceptional accuracy. A grounding strap and fixed color code wiring label are provided with each load point. The mounting hardware is available in either stainless or zinc plated steel for capacities up to 4.5K pounds and galvanized steel in higher capacities. The load sensors have an IP rating of IP68/IP69K.

The HI HLPT is available in the following standard capacities: 225 lbs, 450 lbs, 1,125 lbs, 2.25K lbs, 4.5K lbs and 11.25K lbs.

HI LPTLB Tension Load Cell with HI STLB Sensor
‘S’ Beam Type Tension Load Cell

The Hardy Process Solutions HI STLB Advantage® Lite ‘S’ Type stainless steel sensor is designed for hanging vessels, hoppers, filling machinery and process control. These stainless steel 17-4PH sensors feature IP67 ratings, and allow for tension and compression loading. Improved potting makes it suitable for use in industrial environments. It features the same accuracy and performance as their Advantage counterpart, but without hermetic sealing.

Sensors come with Hardy C2® electronic datasheets to support weightless calibration capabilities when coupled with a Hardy weighing instrument. They are available in a wide range of capacities from 100 kg to 5000 kg (220 lbs to 11Klb).

The HI STLB sensor can be used standalone using a threaded rod or with the same clevis mount used on the HIHLPT load points. The HI LPTLB tension load cell is available in capacities from 220lb (100kg) to 11Klb (5000kg). The sensor is environmentally protected with a plastic covering to IP67. The tension load cell provides a robust, accurate solution for general tension mounted industrial weighing applications.

A grounding strap and fixed color code wiring label are provided with each load point. The mounting hardware is available in either stainless or galvanized steel.

Hardy HI STS and HI STA 'S' Beam Tension Load Cells

The Hardy Process Solutions HI STS beam type nickel plated alloy tool steel sensor is designed for low capacity hanging vessels, hoppers, filling machinery and process control. These tension load cell sensors feature IP67 ratings, and improved potting makes them suitable for use in industrial environments. They are available in capacities from 25 lb to 200 lb (11kg to 91kg).

The HI STA is an aluminum S beam tension load cell available in capacities from 5kg to 20kg (11lb to 44lb). The sensor is rated to IP67 and features improved potting. The S beam configuration provides a robust, accurate solution for low-capacity general tension mounted industrial weighing applications.

Either sensor can be mounted standalone or using threaded rods.