CTH Controls Inc.
 
1.888.550.6829   Supplier Inquiry   About Us      
 
 
 
Eurotherm Power Control
 
 
Eurotherm Power Control
Eurotherm Power Control
Eurotherm Action Instrument
Eurotherm Chessel
Hardy Process Weight
Hardy Process Weight
London Electronics Ltd.
Paragon Robotics
Ohio Semitronics
Dimetix Inc.
TandD Data Loggers
Ametek Dixson
Intempco
Noshok
Precision Digital
Process Sensors Corp
Ultra Electronics
Available Services
Calibration
Calibration
none
Repair
Repair
none
Programming
Programming
none
Power Controllers
EPack™ Compact SCR Power Controllers

OEMs and system integrators need to be able to react quickly to customer needs while maximizing resources. Whether replacing an existing product or designing a new process, the design of the EPack™ power controller has been carefully considered for fast and easy panel installation, commissioning and integration into wider systems, lowering equipment costs, and manufacturing times for you and your customers. End Users continually need to improve operational efficiency and productivity. EPack power controllers can deliver real savings, significantly reducing your energy costs. Get the best from your operations; quick and easy to install, integrate and commission. A compact size doesn’t compromise powerful and versatile features that minimize costs and improve productivity and quality.

EPack™ 1PH Compact SCR Power Controller

EPack-1PH is a compact fully-featured power controller from Eurotherm, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. Additionally, EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Click here to view data sheet

Key Features:
  • Nominal load current from 1 amp to 125 amps
  • Voltage up to 500V
  • Compact DIN Rail and bulkhead mounting
  • Configurable via front panel or Eurotherm software (iTools)
  • Plug and play Ethernet communications with Zero configuration networking (zeroconf)
  • V2, I2 or True power control
  • Controls comprehensive range of loads: resistive, infrared, transformer, silicon carbide
  • Energy usage measurement
  • Advanced load diagnostics
  • Integrated dual port Ethernet switch for “daisy chained” communications
  • Modbus® TCP, Ethernet/IP or Profinet
  • Defend OEM knowledge and IP (OEM Security)

EPack™ 2PH Compact SCR Power Controller
Three Phase 2 Leg Control

EPack 2-PH is the latest generation of power controllers designed to be a cost effective solution for the control of 3 phase loads. The 2 leg control is particularly adapted to the control of balanced loads, directly, or through transformers. Burst firing avoids generation of harmonics and reduces the consumption of reactive power.

The scalability and configurability of EPack fits with the requirements of each application. A wide range of alarms can quickly identify a controller detected fault which reduces downtime.

Click here to view data sheet

EPack™ 3PH Compact SCR Power Controller
Three Phase 3 Leg Control

EPack 3-PH is the ideal solution for the control of all kinds of loads. The control of each phase ensures accurate control, even if the loads are unbalanced). The currents and voltage measures also allow a high level of diagnostics, which can be used for alarm management as well as monitoring (impedance, energy counter, reactive power).

Click here to view data sheet

  Click here for more information
EPack™ Lite Compact SCR Power Controllers

OEMs and system integrators need to be able to react quickly to customer needs while maximizing resources. Whether replacing an existing product or designing a new process, the design of the EPack™ power controller has been carefully considered for fast and easy panel installation, commissioning and integration into wider systems, lowering equipment costs, and manufacturing times for you and your customers. End Users continually need to improve operational efficiency and productivity. EPack power controllers can deliver real savings, significantly reducing your energy costs. Get the best from your operations; quick and easy to install, integrate and commission. A compact size doesn’t compromise powerful and versatile features that minimize costs and improve productivity and quality.

EPack™ Lite - 1PH Compact SCR Power Controller

The EPack™ Lite-1PH controller provides control of single phase non variable resistive or primary transformer loads. It combines simplicity of setup and operation in a compact format.

The combination of advanced configurable firing modes allows close matching to load characteristics to optimise process efficiency.

Click here to view data sheet

Key Features:
  • Nominal load current from 4 to 125 amps
  • Voltage up to 500V
  • Compact DIN Rail and bulkhead mounting
  • Configurable via front panel
  • Fast start up with ‘Quick Start’ or ‘Clone Code’ features
  • V2 or I2 control or Open loop
  • Controls non variable resistive and primary transformer loads
  • Wide range of firing modes: Logic, Phase Angle, Adjustable Burst Firing, Fast Cycle
  • Measurements: Current, voltage or impedance and more
  • Load fault detection up to 1 element of 6
  • SCCR 100kA

EPack™ Lite - 2PH Compact SCR Power Controller
Three Phase 2 Leg Control

The EPack Lite-2PH controller is the latest generation of power controllers designed to be a cost-effective solution for the control of 3 phase loads.

The 2 legs control is particularly adapted to the control of balanced loads, directly, or through transformers. Burst firing avoids generation of harmonics and reduces the consumption of reactive power.

Click here to view data sheet

EPack™ Lite - 3PH Compact SCR Power Controller
Three Phase 3 Leg Control

The EPack Lite-3PH controller is the ideal solution for the control of non variable resistive or primary transformer loads The control of each phase ensures accurate control, even if the loads are unbalanced).

The currents and voltage measures also allow a high level of diagnostics, which can be used for alarm management.

Click here to view data sheet

    Click here for more information
EFit SCR Power Controllers

Easy to integrate and commission, yet highly cost effective, the EFit power controller provides no compromise control for resistive and infrared heating elements.

Efit 16A
EFit 16A
EFit 25A
EFit 25A
EFit 40A
EFit 40A
EFit 50A
EFit 50A
Key Features:
  • Connect Easily
    • No configuration
    • Compact installation
    • Global standardisation
  • Control precisely
    • Eliminate voltage fluctuations
    • Achieve tight tolerances
    • Optimise energy use
  • Improve processes
    • Minimise downtime
    • Maximise throughput
    • Reduce cost of ownership
  Click here to view data sheet Click here for more information
EPower Controllers

The EPower controller uses the newest technologies and innovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements now and in the future.

EPower 2 Module
EPower 2 Module

EPower 3 Module
EPower 3 Module
EPower 34R
EPower 34-R
Key Features:
  • Modular Design
  • Software Configurable
  • QuickStart Easy Setup
  • Advanced Configuration using Graphical Wiring Editor
  • Predictive Load Management
  • Flexible Communications
  • Communications - RS485 Modbus RTU, Profibus, DeviceNet®, Modbus TCP network protocols, CCLink*, EtherNet IP* and ProfiNet*
  • Predictive Load Management (PLM) - A powerful feature to effectively manage your power requirements across multiple machines to save on your energy costs. Read more about PLM.
  • Flexible I/O - The driver module supports standard I/O and up to three additional I/O boards with analogue inputs, analogue outputs, digital I/O and relay outputs
  • LTC - The Load Tap changer option for single phase unit applications only, allows for managing multi-tap transformers, preventing both increased harmonics and the reduction of power factor
  • Energy Counter - Available over communications and for display on user screens, customers can access up to 5 scalable counters, one per individual phases and a global energy usage counter
Ideal for:
  • Glass furnaces
  • Melt heat treatment
  • Food processing
  • Multi-channel heaters
  • High temperature furnaces
  • Induction heating
  • Plastics - Vacuum furnace
Firing Modes:
  • Phase angle
  • Half cycle
  • Burst firing
  • Fix modulation period
  • Logic mode
Load Type:
  • Standard Resistive
  • Complex Resistive
  • Inductive e.g. Transformer
  • Short Wave Infrared
  • Load Configuration
  • Single phase
  • Star
  • Delta
  • Star with neutral
  • Open Delta
Control Type:
  • Single phase
  • 2 x single phase
  • 3 x single phase
  • 4 x single phase
  • Two phase
  • 2 x two phase
  • True three phase
Feedback:
  • V2
  • I2
  • True power
  • RMS load voltage
  • RMS load current
  • Open loop
  • Large extruders
  Click here to view brochure Click here for more information
 
 
CTH Controls Inc.   CTH Controls Inc.
5100 South Service Road, Unit 2
Burlington, ON. L7L 6A5 Canada
Phone: 905-792-6829
Toll Free: 1-888-550-6829
Fax: 905-792-6902
sales@cthcontrols.com
  arrow Products arrow Contact Us  

For Secure Payments
Mastercard Visa
<empty> <empty> <empty>
<empty>
PAYPAL
PAYMENT
GUIDE
<empty>
<empty> <empty> <empty>
  arrow Services arrow Supplier Inquiry  
  arrow Support arrow ISO Certification  
  arrow About Us arrow Return Policy  
    arrow Careers  
  arrow Line Card  
© Copyright 1998-2024, CTH Controls Inc. All rights reserved