CTH Controls Inc.
 
1.888.550.6829   Supplier Inquiry   About Us      
 
 
 
Eurotherm Process Control
 
 
Eurotherm Power Control
Eurotherm Power Control
Eurotherm Action Instrument
Eurotherm Chessel
Hardy Process Weight
Hardy Process Weight
London Electronics Ltd.
Paragon Robotics
Ohio Semitronics
Dimetix Inc.
TandD Data Loggers
Ametek Dixson
Intempco
Noshok
Precision Digital
Process Sensors Corp
Ultra Electronics
Available Services
Calibration
Calibration
none
Repair
Repair
none
Programming
Programming
none
Indicator and Alarm Units
Measurement, Indication and Alarms

Available in four standard DIN formats and complementing our range of world class PID controllers the Eurotherm range of indicators and alarm units provide accurate temperature or process measurement, clear indication with alphanumeric messaging and versatile alarming strategies.

2100i Indicator & Alarm Unit
2132i and 2108i Indicators 2132i and 2108i Indicators
The 1/32 DIN 2132i and 1/8 DIN 2108i provide you with accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay outputs.
  • Reliable performance and accuracy
  • Simple operation
  • Fully configurable using operator interface
  • Alarm blocking on start-up

A universal input enables selection of nine internally stored thermocouple types and the PT100 resistance thermometer.  Other input linearizations may be factory  downloaded.  Linear inputs can be scaled to the desired display range.

Two relay outputs are configurable for alarms.  Three internal alarm setpoints are provided - configurable as high, low or deviation alarms.  Alarms can be 'blocked' on start-up to prevent unnecessary operator alerts.

Tactile buttons ensure positive operation.

The operator interface can be customized to present only those parameters that an operator needs to see and adjust.  Other parameters are locked away under password protection.

Ideal for:   Features:
  • Plastics - extrusion
  • Chillers
  • Sterilizers
  • Heat treatment -small ovens
  • Heat sealing
  • Trace heating
 
  • Universal input selection
  • Two configurable outputs
  • Three internal alarm setpoints
  • Heater failure detection
  • Tactile buttons
  • Customized operator interface
View the 2132i Configurator
View the 2108i Configurator
View Sub21 Spare Parts and Accessories
  Click here to view data sheet Click here for more information
2408i Indicator and Alarm Unit

2400i Indicator and Alarm

2408i Indicator and Alarm

The 2408i provides you with accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay outputs.

  • Large 5 digit display providing excellent visibility
  • Furnace over temperature limits
  • Extrusion melt pressure indication and alarming
  • Fieldbus communications providing system integration
  • Second process input provide additional alarming strategies
  • Modular construction offering increased I/O flexibility

A universal input allows selection of nine internally stored sensor types. Linear inputs are scaled to the desired range. Other input linearizations may be downloaded at time of order or by using iTools. A fifteen point linearization can be used to provide an accurate indication of non-standard signals

Its large 5 digit display, available in red or green, provides you with clear indication of the process value. An optional second process input allows the average, difference, minimum or maximum of two values to be displayed and alarmed upon.

Up to three I/O modules from a total selection of nine, including relay, logic, analog and transmitter PSU, can be fitted providing excellent flexibility for a wide range of applications.

System integration can be achieved using either conventional analog retransmission or with digital communications. 2408i supports the Modbus protocol in both its serial and Ethernet formats as well as Devicenet and Profibus DP.
Ideal for:   Features:
  • Temperature & process indication
  • Process protection
  • Heat treatment  - Furnace over temperature
  • Plastics processing - Extrusion melt pressure
  • Weighing platforms
 
  • Universal input
  • Strain gauge input
  • Red or green display
  • Process variable retransmission
  • Serial Modbus™ comms
  • Profibus DP
  • Devicenet
View the 2408i Configurator
View the 2408i Optional Configuration Code
View Sub24 Spare Parts and Accessories
  Click here to view data sheet Click here for more information
3200i Indicator and Alarm Unit

2200 Temperature Controller / Programmer

3204i, 32h8i, 3216i - Accurate indication of temperature and process measurements

The Eurotherm range of 3200i indicators offer accurate indication of temperature and process measurements. Process interlocks, including overtemperature furnace limits, are implemented using relay output channels.

The emphasis is on ease of use. A simple ‘Quick Start’ code is used to configure all the functions essential for indication and protecting your process.
Ideal for:    
  • Temperature & process indication
  • Level/pressure/flow
  • Process protection
  • Heat treatment - furnace over temperature
  • Plastics - extrusion melt pressure
  • Weighing platform
   
View the 3200i Configurator
View the 3200i Series Quickstart Codes
View SUB32 Spares and Accessories
  Click here to view data sheet Click here for more information
 
 
CTH Controls Inc.   CTH Controls Inc.
5100 South Service Road, Unit 2
Burlington, ON. L7L 6A5 Canada
Phone: 905-792-6829
Toll Free: 1-888-550-6829
Fax: 905-792-6902
sales@cthcontrols.com
  arrow Products arrow Contact Us  

For Secure Payments
Mastercard Visa
<empty> <empty> <empty>
<empty>
PAYPAL
PAYMENT
GUIDE
<empty>
<empty> <empty> <empty>
  arrow Services arrow Supplier Inquiry  
  arrow Support arrow ISO Certification  
  arrow About Us arrow Return Policy  
    arrow Careers  
  arrow Line Card  
© Copyright 1998-2024, CTH Controls Inc. All rights reserved